- Home
- |
- Stitching solutions
- |
- Applications
- |
- Buy
- |
- Support
- |
- Contact
- |
-
My Autopano Pro forum
Sharing knowledge around Autopano
You are not logged in.
Announcement
#1 2008-11-09 21:01:19
- arb
- New member
- Registered: 2008-11-09
- Posts: 5
Pano has two holes
Sorry I don't know how to describe this problem other than with a picture.
Any idea what's going wrong here? I see this quite often.
Offline
#2 2008-11-09 21:26:07
Re: Pano has two holes
Use the Control Points Editor to check where APP has placed CPs. Remove bad CPs and avoid CPs on clouds and water.
You don't seem to have much overlap anyway.
http://www.autopano.net/wiki/action/vie … ama_Editor
http://www.autopano.net/wiki/action/vie … nts_Editor
Andrew
Nikon D40, Nikkor 10.5mm fisheye, Sigma 8mm f3.5 fisheye, 18-55mm kit lens, Nodal Ninja 5 Lite
Nikon P5100, CP5000, CP995, FC-E8, WC-E63,WC-E68, TC-E2, Kaidan Kiwi 995, Bophoto pano bracket
Merlin/Orion panohead + Papywizard on Nokia 770/N800 and Windows XP/2K
Offline
#3 2008-11-10 08:15:44
- AlexandreJ
- Absolute beginner
- From: Challes les eaux, France
- Registered: 2005-11-14
- Posts: 3753
- Website
Re: Pano has two holes
This is a typical lens distortion correction divergence coming from unsolvable CP. Clean them, then reoptimize and done. If it really don't work, disable lens distortion correction.
Offline
#4 2008-11-13 02:10:31
- arb
- New member
- Registered: 2008-11-09
- Posts: 5
Re: Pano has two holes
The CPs were all perfectly placed so cleaning and optimising didn't help. But disabling lens distortion correction solved it. Thank you.
Offline