- Home
- |
- Stitching solutions
- |
- Applications
- |
- Buy
- |
- Support
- |
- Contact
- |
-
My Autopano Pro forum
Sharing knowledge around Autopano
You are not logged in.
Announcement
#1 2008-11-08 17:28:14
- AmdAntonio
- Member
- Registered: 2008-09-27
- Posts: 13
Laptop -> Merlin directly link?
I'd like to know if it is possible to connect directly the output RSR 232 of the laptop by wire with the input of the HANDCONTROLLER of the PANOHEAD MERLIN?
Antonio
Offline
#2 2008-11-08 17:36:48
Re: Laptop -> Merlin directly link?
AmdAntonio wrote:
I'd like to know if it is possible to connect directly the output RSR 232 of the laptop by wire with the input of the HANDCONTROLLER of the PANOHEAD MERLIN?
Antonio
No, it is not possible to connect directly.
You need an RS232-TTL adapter in between.
The simplest and cheapest way of assembling such an adapter is to start with the Tronisoft 4201 RS232-TTL module:
http://www.tronisoft.com/4201.php
Then add two 220 ohm resistors and a 4-way RJ11 cable - as shown/described here:
http://www.autopano.net/forum/p30622-20 … -21#p30622
Andrew
Nikon D40, Nikkor 10.5mm fisheye, Sigma 8mm f3.5 fisheye, 18-55mm kit lens, Nodal Ninja 5 Lite
Nikon P5100, CP5000, CP995, FC-E8, WC-E63,WC-E68, TC-E2, Kaidan Kiwi 995, Bophoto pano bracket
Merlin/Orion panohead + Papywizard on Nokia 770/N800 and Windows XP/2K
Offline